FAQ: How To European Mount A Deer Head?

Where do you cut a deer skull for a European mount?

Cut Antlers Off Skull The most common method of mounting deer antlers on a plaque involves keeping the antlers intact with the skull plate. In this case, you remove the antlers, keeping them connected to the skull plate, by sawing down into the skull in front of both antlers and just behind the eye sockets.

How do you do a euro mount at home?

1. Step 1: First, remove the hide, eyes and flesh from the skull with a sharp knife, and take extra care to pry the hide from the base of each antler – a flathead screwdriver works great.
2. Step 2: Next, fill your pot with water and place it on the lit burner.
3. Step 3: Place the skull in the pot and let it sit for 1-2 hours.

Can you bury a deer head for European mount?

Easiest Way to Clean a Deer Skull: Part 1. The European Mounts are gaining popularity. You can boil and/or pressure wash the flesh and brains off of the skull. You can bury the skull.

What’s the best way to do a European mount?

How To Make a European Mount

1. Remove the skin from the skull.
2. Gently boil the skull in saltwater for about 2 hours and check it.
3. After you’ve picked some of the meat off, put the skull back in the pot for an hour or so.
4. I use an electric power washer (a garden hose with high speed nozzle will work) to blast the meat and soft tissue off the skull.

How do you prepare a deer skull for a European mount?

European Mounted Deer

1. Step 1: Harvest Game Animal Legally. Remove Head.
2. Step 3: Cook Meat Off Skull. To cook the meat from the skull I used a large propane turkey fryer.
3. Step 4: Clean Skull. 5 More Images.
4. Step 5: Wash and Degrease the Skull.
5. Step 6: Whiten the Skull.
6. Step 7: Prep Your Mount Surface.
7. Step 8: Drill Your Holes!
8. Step 9: Mount It!

What to use to whiten a European mount?

You can buy powders that you mix with water and brush onto the skull. They don’t do much other than coat the skull with white powder and do a poor job of actually whitening the bone. Hydrogen peroxide is the way to go.

How much does a European mount cost?

Registered. I would guess $50 to $150 depending on the plaque. If you just want the skull back, I would guess in the $50 to $75 range. A simple single panel plaque, $75 to $100, and a pedestal style mounting panel around $100 to $150.

How do you seal a European mount?

The best for sealing is Polycrylic clear satin spray. Just use one light coat. I hold the skull by the rack and do it by hand. It helps to rotate as you spray and Continue shortly afterwards.

How long to boil deer skull for EUROpEAN mount?

When you’ve got as much tissue out as possible, cover the skull — not the antlers — with water and a few tablespoons of Amway dishwashing powder or its equivalent. Boil or, better yet, simmer the skull for about 1-1/2 hours (less for a small deer, as too much boiling can loosen the fragile bone connections).

How long does it take for a buried deer head to decompose?

Mine were freshly skinned and defleshed when I buried them. It took six months for the skulls to lose all flesh inside and outside the skull.

How long should I leave my deer head buried?

I buried a deer head in my yard, (west Texas) and after about 6 months, I had a piece of leather coated bone. I would just leave it out for the flies and maggots to get to it, Unless you live in town. I guess you have already buried it. Id give it at least 4 months to get the funk off it.

Can you drill into a deer skull?

First off, you need to mark the plaque at the exact spot where the drilled hole in the skull will make a perfect match when you finally mount the skull to the wood. After you mark the spot on the wood plaque, drill it with the 3/8s inch drill bit only halfway through.

How do you display a European mount?

Typically a european deer mount is simply hung on the wall via a nail or screw that goes in the occipital foramen (the hole in the back of the head). Or, you can just display your skull mount on a desk or counter.